UTD-MC-NR
UTD-MC-NR

UTD-MC-NR is unmanaged fiber to fiber media converter. UTD-MC-NR features make the end to end fiber link completely transparent. This allows for more efficient troubleshooting and less on-site maintenance.

Converter supports 155Mbit/s – 1.25Gbit/s transmission speed. Device supports wide range of optical interfaces (exact type of optical interfaces depends on device version) . UTD-MC-NR is protocol and data format transparent therefore converter supports Gigabit Ethernet , SDH (STM-1/4) , ATM and others typical applications.

SPECIFICATION DESIGNATION
Fiber to Fiber Media Converter, 155 Mbit/s version UTD-MC-NR 155 Mbit/s
Fiber to Fiber Media Converter, 622 Mbit/s version UTD-MC-NR 622 Mbit/s
Fiber to Fiber Media Converter, 1.25 Gbit/s version UTD-MC-NR 1.25 Gbit/s
Fiber to Fiber Media Converter, 155 Mbit/s rack mount version UTD-MC-NR-RACK 155 Mbit/s
Fiber to Fiber Media Converter, 622 Mbit/s rack mount version UTD-MC-NR-RACK 622 Mbit/s
Fiber to Fiber Media Converter, 1.25 Gbit/s rack mount version UTD-MC-NR-RACK 1.25 Gbit/s

 

Special features:
  • Fiber media conversion
  • Signal amplitude regeneration
  • 155Mbit / 622Mbit / 1.25 Gbit/s transmission speed (depending on device version)
  • SC/PC connectors
  • Port status LED signalization
  • Supply voltage range 12-60V DC (230VAC/48VDC power adapter can be attached)
  • Provides multimode to single-mode and dual to single-fiber media conversion
  • ​Provides wavelength conversion for CWDM applications
Technical specification:

PARAMETERS

Optical Ports

  • 155Mbit /622 Mbit /1.25 Gbps transmission speed
  • SC/PC connectors
  • SM/MM/WDM/ 1310nm, 1550nm, 665nm(POF)
  • Ranges depending on the type of optical port 15, 50, 120 (1550nm) km, 20, 40, 60,100km WDM, 300m(POF)
  • Fiber type 9/125um, 62.5/125um, 980/1000um

Environmental Parameters

  • Ambient temperature +5 - 40°C
  • Relative air humidity 80% in temperature +20°C

Regulatory approvals

  • Immunity EN55024,
  • Electrical Safety EN60950

Dimensions

  • Housing 103x77x53mm
  • Suitable for mounting on DIN rail
  • Weight 0.3 kg

Power supply

  • Supply voltage 1-60V DC
  • Attached 230VAC/48VDC power adapter
  • Up to 5W power