UTD-OM-C
UTD-OM-C

UTD-OM-C is a high performance optical line transmission equipment, combines one ITU-T G.703 compliant standard electrical E1 2048 kbit/s lines plus 10/100 Mbit/s Ethernet signal into an optical data stream for transport over fiber optic. Several transmitter options are available (including WDM version and with SFP module).

UTD-OM-C ​is equipped with a new generation in-built four-port Ethernet switch supporting "flow control", VLAN, "autocrossover" functions allowing the connection of users without the necessity of using additional devices. On each port of the switch it is possible to assign available transmission band from 64kbit/s to 100Mbit/s with pitch of every 1Mbit/s. Thus it is possible to set priorities for each user directly in the device.

 

SPECIFICATION

 DESIGNATION LOCAL INTERFACE LINE INTERFACE
Optical Multiplexer, 1x E1 G.703 2048kbit/s
100Mbit/s Ethernet, WWW, Telnet, SNMP, CLI management		 UTD-OM-C 1xE1,
Ethernet
10/100Mbit/s		 FO
Optical Multiplexer, 1x E1 G.703 2048kbit/s
100Mbit/s Ethernet, WWW, Telnet, SNMP, CLI management
Rack mount version		 UTD-OM-C-RACK 1xE1,
Ethernet
10/100Mbit/s		 FO

 

Gallery
Special features:
  • Connection Ethernet LAN 10/100 Mbit/s and 1xE1 G.703 2048kbit/s through optical link
  • 4-port Ethernet switch with a 1000 MAC address table
  • Flow control support
  • Possibility of defining up to 15 VLAN networks (full range VID) in order to create independent transmission channels
  • WWW, Telnet, SNTP, SNMP, Console management
  • Remote software update
Technical specification:

PARAMETERS

Ethernet Ports

  • Transfer speed of 10/100Mbits
  • Feature of flow control​​
  • Connection error signalling
  • ​4 x RJ45 connector

Power

  • Power voltage 12-60V DC
  • 230VAC/9VDC external, supplied adapter
  • Up to 6W

Optical line interface

  • Fiber type 9/125um, 62.5/125um, 980/1000um
  • ​SC/PC connectors
  • SM, MM, WDM, 1310nm, 1550nm​

Multiplexing

  • 1 E1 channels
  • Through of data stream Ethernet - 100Mbit/s

E1 line interfaces

  • Compliant with G.703, 2048 kbit/s ​
  • 120 Ohm E1 impedance
  • Line code HDB-3
  • ​Local and remote E1 loop
  • ​Types of connectors:RJ45 of high density (1-2, 4-5)

Dimensions

  • ​​Housing 103x230x53mm 
  • Weight to 1kg​